Rabbeting Router Bit Kits
Katana_rabbeting_kits

Rated:

Review this product...


2 flute, carbide tipped with totally enclosed ball bearing guides. By changing the ball bearing guides, you can make 6 different depths of cuts, plus flush trim. Set consists of 1-3/8" rabbeting bit, 7 bearings (3/8", 1/2", 5/8", 3/4", 7/8", 1-1/8", and 1-3/8" OD) and a hex key. Use for cutting rabbets, tongue & groove joints and ship lap joints. Will also cut a 1/2" (H) slot. 1/4" and 1/2" shank.

9 PIECE 1/4" SHANK RABBETING KIT - SALE!
SET #16368 - 1/4" and 1/2" shank rabbeting kits include 1-3/8" rabbeting bit, 3/8", 1/2", 5/8", 3/4", 7/8", 1-1/8", 1-3/8" bearings, and a hex key. Individual Price $61.50. SAVE $18.50!
SALE
$43

9 PIECE 1/2" SHANK RABBETING KIT- SALE!
SET #18668 - 1/4" and 1/2" shank rabbeting kits include 1-3/8" rabbeting bit, 3/8", 1/2", 5/8", 3/4", 7/8", 1-1/8", 1-3/8" bearings, and a hex key. Individual Price $63.50. SAVE $28.50!
SALE
$43

all customer reviews and ratings

Average Customer Rating: (1 reviews)
Add your own review for this product

The Best (5/5), Oct 8, 2008

By Alan Konitzer (New Smyrna Beach FL US)

I bought this set a while back, and it still works as good as when I got it. I work with a lot of oak and maple, and the cutter has kept its edge through many feet of lumber. The bearings change quickly and are very accurate for width. This is one set you have to have; you'll use over and over.

Add your own review for this product

Individual Rabbeting Router Bit
Katana_rabbeting_kits

No reviews yet! Be the first...

Review this product...


Item #

Large Dia.

Cut Hght.
Shank
Price
 Order
#17691
 1-3/8"
1/2"
1/2"
$25

7 PIECE BEARING KIT- SALE!
KIT #12107 - Fits Katana rabbeting router bit #17691 or any bit which uses 3/16" ID bearings. Includes 1/2", 5/8", 3/4", 7/8", 1-1/8", 1-3/8" bearings, and hex key. Individual Price $38.50. SAVE $18.50!

$20

all customer reviews and ratings

No reviews yet! Be the first...

Review this product...



Round Nose & Core Box Router Bits
katana_round_nose_&_core_box_router_bits

1 or 2 flute, carbide tipped. Will plunge cut in soft or hard woods as well as composition materials. Can be used for reeding, fluting, veining, grooving and general ornamentation where a round bottom groove is desired. 1/4" and 1/2" shank.

Item #  Bit Type  Large
Dia.		 Cut
Height		 Shank Price Order
#16441 Round Nose  1/8" 5/16° 1/4" $13
#16443 Round Nose  1/4" 5/16° 1/4" $16
#18745 Round Nose  1/2" 1° 1/2" $21
#18738 Core Box  3/4" 3/4° 1/2" $23
#18740 Core Box  7/8" 5/8° 1/2" $25
#18742 Core Box  1" 3/4° 1/2" $27


Flush Trim Router Bits
katana_flush_trim_router_bits

2 flute, carbide tipped with totally enclosed ball bearing guides. For use in trimming laminates and pattern/template routing. 1/4" and 1/2" shank.
Item #
 Large
Dia.
Cut
Hght.		 Shank Price Order
#15501  3/8" 1" 1/4" $15
#15503  1/2" 1" 1/4" $15
#17803 1/2" 1" 1/2" $15
#17805 1/2" 1-1/2" 1/2" $18
#17807 1/2" 2" 1/2" $21
#17808 3/4" 1-5/8" 1/2" $29


Shear Angle Flush Trim Router Bits
katana_flush_trim_router_bits

2 flute, carbide tipped with totally enclosed ball bearing guides. The shear angle cutting flutes produce a smoother cut than the traditional straight fluted bits. Instead of chopping at the wood fibers at a 90˚ angle, the shear angle design allows for a smoother shear angle, slicing cut. Eliminates tear-out problems when routing end or cross grain on hard woods. 1/4" and 1/2" shank.
Item #
 Large
Dia.
Cut
Hght.		 Shank Price Order
#15509  1/2" 1-3/16" 1/4" $20
#17809  1/2" 1-3/16" 1/2" $21


Flush Trim/Pattern Top & Bottom Bearing Bits
katana_flush_trim_router_bits

NEW! See our Flush Trim Top & Bottom Bearing bit How-To Video!
Two bits in one! You have the option of mounting your template above or below your workpiece. You can trim laminate on either side of your substrate without having to change router bits or turn over your workpiece. Just adjust your router bit height before making your second pass. All bits are 2 flute, carbide tipped with two totally enclosed ball bearing guides. 1/4" and 1/2" shank.
Item #
 Large
Dia.
Cut
Hght.		 Shank Price Order
#16513  1/2" 1" 1/4" $25
#18813  3/4" 1-3/8" 1/2" $34
#18814 3/4" 2" 1/2" $39



Watch a demonstration video of the
Katana Flush Trim/Pattern Top & Bottom Bearing Bits