Router Bits and Woodworking Products

A North Carolina furniture maker reviews Katana® Straight bit performance. Review 4/27/10 by David G. (NC) "I purchased (Katana Straight router bit #17756) and got a chance to use it today. WOW! All I can say is fanfreakingtastic. I've used other bits by different mfg's. with reasonably satisfactory results. This Katana bit however slices through the heavy Maple I have here in NC like it was cheddar cheese. I work mainly with tree stumps and slabs to make tables and let me assure you, some of this stuff is murder on a cutting edge. After approx. 2 hours of pretty much non-stop use, I took the bit off my router and noticed there was a good deal of pitch residue covering it. I clean my bits with oven cleaner so I sprayed this one down and let it soak for about 15 mins. Hit it with some hot water and my scrub brush and it's clean as new. Also, (and this is what gets me), IT'S STILL SHARP ENOUGH TO SHAVE WITH!!				Now THAT'S performance. None of my other bits can even come close to this. Even my Freud bit can't go for more than an hour maybe before it needs honing. I'm sold on the Katana bits from you guys." SEE NEW KATANA® PRODUCTS Another Katana® Review.
							Micro-grain carbide: Premium fine grain carbide yields a longer cutting life, and allows multiple resharpenings.
							High Hook & Shear angles: Allows cutter to slice smoothly into stock, producing the cleanest, splinter free cuts.
							Anti-kickback design: Round shoulder between cutters drastically reduces the chance of kickback.
							Diamond honed cutters: Multi-axis CNC grinders sharpen to a 600 grit mirror finish. Ground to +/- .005"
							Non-stick coating: Baked on heat resistant coating prevents sawdust, resin and pitch build-up.
							Safety Gauge Shank: Lines etched on the shank help you seat the bit in the router collet. A Katana® exclusive.

Beading Conversion Kit Bearing Biscuit Joining Kits-KATANA® Bull Nose Chamfer Core Box Cove Crown Molding Double Roman Ogee Dovetail Drawer Lock Dropleaf Table Set Edge Beading Edge Banding European Door Edge Flush Trim Flush Trim - Shear Angle Flush Trim/Pattrn Top-Bottom Bearing Glue Joint Jointmaker 3 Piece Set Kitchen Door and Drawer Sets Kitchen Door/Drawer Undercutter Set Laminate Trimming Bits with Euro™ Square Bearings Lock Miter Matched Rail & Stile Set Matched Rail & Stile Set for Entry Doors Mitered Door Frame Molding Plane Pattern/Flush Trim Rabbeting Kits Raised Panel Raised Panel Door Bit Set Raised Panel Door Undercutter Set Raised Panel Door Bit w/ Undercutter Roman Ogee Round Nose & Core Box Round Over Round Over Beading Sets Shear Angle Flush Trim Solid Carbide Spiral Solid Carbide Flush Trim Slot Cutters-3 Wing Slot Cutter Arbors with Bearing Stacked Ogee Rail and Stile Straight Straight BIt Sets Traditional Table Edge Tongue & Groove Set Tongue & Groove V-Notch Set Undercutter 12º Face & Quarter Round Raise Panel 15º Bevel Raised Panel 5 Piece Kitchen Door & Drawer Set Cove Raised Panel Drawer Lock Rail and Stile Sets Ogee Raised Panel Reverse Glue Joint Undercutter

• HOME
• FAQ's
• Site Map
• Search
• Instructions
• FREE Catalog
• E-mail
• Contact
• Ordering
• Gift Certificates
• Woodworkers Showroom

Questions? Call Toll Free: 1-800-533-9298

Copyright 2009. MLCS Ltd.