MLCS_brass_template_guide_kit

Universal Router Plate

FOR PORTER CABLE® TYPE TEMPLATE GUIDES!
The Universal baseplate includes a centering pin to perfectly align the baseplate and 1-3/16" Porter Cable® style guide templates to your router collet. The 6" clear acrylic baseplate is predrilled for most common routers.
#9099 .....................................SALE! $24.95
MLCS_brass_template_guide_kit

Brass Template Guide Kit

The 9 piece kit will significantly expand the use of your router. For template controlled operations such as dovetailing, stair routing, hinge butt routing, omni jig template, lock face routing and other general template operations. Template guides can be used directly with any router having a baseplate with a 1-3/16"* diameter center hole. The kit contains two lock nuts and seven different template guides (5/16", 3/8", 7/16", 1/2", 5/8", 3/4", and 51/64" OD).

*Works with most DeWalt, Porter Cable®, & Skil routers. Works with some Black & Decker, Elu, & Hitachi routers. Item #9344 (Router Replacement Base), makes kit universal.

Brass Template Guide Kit
#9674 ..........................SALE! $19.95 


Zero Clearance Ring Kit

SALE! Solid brass router reducer bushings make woodworking safer by closing up the opening in the base of your router to match the diameter of smaller bits. They also help reduce tear out, provide support for smaller workpieces and increase dust collection efficiency. The kit includes seven bushings (with 5/32", 9/32", 13/32", 17/32", 21/32", 25/32" and 29/32" diameter openings), two locking rings and a plastic storage case. They'll fit all router bases or router table inserts that have a standard 1-3/16" diameter recessed hole to accept template guide bushings. Use with any bit with OD of 7/8" or less; i.e., straight, spiral, round nose, v-groove, dovetail, etc. Regular Price $49.00.

Safety Reducer Ring Kit
#9675..........................................SALE! $29.95
MLCS_brass_template_guide_kit

Bushing Spring/Lock Washers Set
Sometimes, template guide bushings vibrate loose during a cut.... it's frustrating and can cause costly errors in your work or even destroy your bushings. Now, STOP that problem for good with this new spring washer. Just the right amount of pressure on the locking nut keeps the bushing perfectly secure. 1-3/16" OD washer, pack of 2.

2 Piece Bushing Spring/Lock Washers Set
#9044 ..........................SALE! $5.95
router_replacement_bases

Router Replacement Bases
For Porter Cable® type Template Guides

Many template guides, dovetail machines, and inlay kits, are designed by to fit the popular Porter-Cable® style router base opening. Style "A" is pre-drilled to mount on most popular Sears routers. "B" is for the Bosch 1613VS router.

Reg. $18.95........................................SALE $15.95

6" UNIVERSAL BASE
A #9339 - with center hole for 3 & 4 pattern routers ..

6" BOSCH
B #9346 -1613VS center hole base .......................


Router Bit Storage Cabinet

The MLCS wooden storage cabinet is designed to store up to 66 router bits. Mount our new cabinet on your router table base, wall or workbench using the keyhole slots on the back side of the cabinet. Available for either 1/4" or 1/2" shank router bits. Maximum bit size is 1-1/2" large diameter and 3" overall length. Reg. Price $31.95.
Click photo at right to see silkscreen design on wooden cabinet.
Router Bit Storage Cabinet with 1/4" holes
#9660 Reg. $31.95........................ONLY $24.95

Router Bit Storage Cabinet with 1/2" holes
#9683 Reg. $31.95........................ONLY $24.95


Coin Templates Set

 Coin Template

Includes a 1/4" spiral downcut bit and 1/8" OD guide template bushing!
Use your router to create coin displays for all current U.S. coins. Secure the 3/8" acrylic template to your work piece with double sided tape. Rout the proper sized holes for penny, nickel, dime, quarter, half dollar and dollar coins. *The guide bushing requires a 1-3/16" stepped hole in your router base.

#9445 Reg. $39.95 ...................SALE $29.95