Router Bits and Woodworking Products

Butterfly Threaded Thru Hole Knob

3/4" deep brass threaded insert for jigs and fixtures. 3" Knob with 1/4" x 20 tpi threads.

NOW ONLY $1.25 Each!

Item #9117

Spur 3 Point Spade Bits

• Extra long center point prevents drifting and drills straighter.
• Outside cutting spurs cleanly shear the wood fibers to score the edge and smooth the sides of every hole.
• Flat bottom, easily sharpened main cutting edges make it easy to cut fast and bore deep holes.
• Hole in the blade to help fish wires. (These bits are very popular with electricians and alarm installers).
• You can easily "touch up" grind the two cutter wings to sharpen or "adjust" the size for a custom hole diameter. For example: make a 23/32" hole from a 3/4" bit that has been re-ground.

ONLY $2.79 each for 12" length ONLY $2.09 each for 6" length
Item# 6" length		Size	Item# 12" length
#9501		1/4"	#9521
#9502		5/16"	#9522
#9503		3/8"	#9523
#9504		7/16"	#9524
#9505		1/2"	#9525	Sold Out
#9506		9/16"	#9526
#9507	Sold Out	5/8"	#9527
#9508		11/16"	#9528
#9509	Sold Out	3/4"	#9529	Sold Out
#9510		13/16"	#9530	Sold Out
#9511		7/8"	#9531
#9512	Sold Out	15/16"	#9532
#9513		1"	#9533	Sold Out
#9514		1-1/8"	#9534
#9515		1-1/4"	#9535
#9516		1-3/8"	#9536
#9517		1-1/2"	#9537

Height Adjustment Knob

Plunge routers have a strong spring action mechanism that makes fine tuning the height adjustment difficult, especially when mounted under a router table. Our plunge router height adjustment knobs easily changes depth of cut with a turn of the knob. The extra long knobs clear the router, and a star knob handle allows for easy gripping. List Price: $19.95

NOW ONLY $6.99 (SAVE 65%!)

Item #9187 (for Porter Cable 693/6931)

Slick Plates and Tape

Super Slick UHMW plates and tape for wear and slide points on jigs and fixtures, mitre gauge slot guides and saw fences. Flexible 1/32" thick tape (item #9490) is self-adhesive.

NOW ONLY $8.95

Item #9490 36" Slick Tape (3" x 1/32")

NOW ONLY $7.95

Item #9492 36" Slick Bar (3/4" x 3/8")  

Toggle Hold Down Clamp

This is a Toggle Hold Down Clamp 5" tall by 7" overall length with a holding force of 500 lbs.

NOW ONLY $9.95!

Item #9438

Hook Rulers

Adjustable. Allow precise measurements from the edge of your workpiece. Ruler has both 1/32" and 1/64" increments marked. A cam screw releases the hook for adjusting the overhang or completely removing it from the steel ruler.

NOW ONLY $13.99!

Item #9701: 6" Hook Rule

NOW ONLY $21.99!

Item #9702: 12" Hook Rule

Bandsaw High Tension Spring

Get improved tracking and straighter, more precise cuts with your band saw. Replace your stock spring with our high tension spring. It's superior strength and durability will help you properly tension your band saw blades. Fits Delta, Jet and most 14" band saws.

NOW ONLY $19.95!

Item #9321: Bandsaw High Tension Spring

Digital Fence Readout For Table Saws

• Position your table saw with precision
• Easy installation • Quick calibration • Easily repeatable cuts
• Works easily with most rectangular or round rail fences
• Mounts on the left or right side of the fence
• Easy-to-read-display in millimeters, inches, and fractions
• Accurate to .002" per foot. Measures up to 60".
• Includes 60" of aluminum track with sensor tape, digital readout device, mounting hardware, 2 drill bits, 2 CR 2032 batteries and an additional mounting bracket.

LOWER PRICE! NOW ONLY $129.95

Order Item #9580