MLCS Bargain Bin 3
Let the Bargains Continue!
Special sell-out quantities, discontinued items from our catalog, preview items, and more all end up in our Bargain Bin which means BIG $$$$$$$$$avings for YOU!!
$15.00 Minimum Purchase Required. Can be combined with other items not on this page to meet minimum purchase requirement.
Quantities limited. Offer good while supplies last.
ALL ITEMS FREE SHIPPING IN THE CONTIGUOUS USA!
Butterfly Threaded Thru Hole Knob
3/4" deep brass threaded insert for jigs and fixtures. 3" Knob with 1/4" x 20 tpi threads.
NOW ONLY $1.25 Each!

Spur 3 Point Spade Bits
- Extra long center point prevents drifting and drills straighter.
- Outside cutting spurs cleanly shear the wood fibers to score the edge and smooth the sides of every hole.
- Flat bottom, easily sharpened main cutting edges make it easy to cut fast and bore deep holes.
- Hole in the blade to help fish wires. (These bits are very popular with electricians and alarm installers).
- You can easily "touch up" grind the two cutter wings to sharpen or "adjust" the size for a custom hole diameter. For example: make a 23/32" hole from a 3/4" bit that has been re-ground.
Buy Sets and Save!
Item #9519:
All 15 sizes 12" length
NOW ONLY $34.95!
Item #9518: All 15 sizes 6" length
NOW ONLY $18.95
Threaded Inserts
10 Solid Brass fasteners (threaded inserts) per package. Great for joining wood, plywood, and chipboard; use in knockdown furniture. Easy to use--just drill a pilot hole, thread insert using T-Wrench or screwdriver and attach other part using a bolt or machine screw.
| #9731 | 6 mm x 32 tpi (1/4" pilot hole) | $2.99 | |
| #9732 | 8 mm x 32 tpi (1/4" pilot hole) | $2.99 | |
| #9733 | 10 mm x 24 tpi (1/4" pilot hole) | $2.99 |
Slick Plates and Tape
Super Slick UHMW plates and tape for wear and slide points on jigs and fixtures, mitre gauge slot guides and saw fences. Flexible 1/32" thick tape (item #9490) is self-adhesive.
NOW ONLY $8.95
Item #9490 36" Slick Tape (3" x 1/32")
NOW ONLY $7.95
Toggle Hold Down Clamp
This is a Toggle Hold Down Clamp 5" tall by 7" overall length with a holding force of 500 lbs.
NOW ONLY $9.95!
$15.00 Minimum Purchase Required. Can be combined with other items not on this page to meet minimum purchase requirement.
Quantities limited. Offer good while supplies last.