|
||
2 flute, carbide tipped with totally enclosed 1/2" OD ball bearing guide. Use for cutting rabbets, tongue and groove joints and ship lap joints. Will also cut a 1/2" (H) slot. Check out the very useful MLCS Corner Chisel. It's perfect for squaring off the rounded corners left by rabbeting and hinge mortising bits. |
![]() |
|
|
||
The rabbeting bits in our kits are production quality, 2 flute, Carbide Tipped with totally enclosed 1/2" OD ball bearing guide. Use for cutting rabbets, tongue & groove joints and ship lap joints. Will also cut a 1/2" (H) slot. Our 6 piece set consists of a rabbeting bit, 4 bearings (3/8", 1/2", 5/8", 3/4" OD) and a hex key. By changing the ball bearing guides, you will be able to select 4 different depths of cuts. See chart below for depths of cuts. The bit has a carbide height of 1/2". Our 6 piece kit makes FOUR different cuts! |
![]() |
|
| Make SIX different cuts with our 9 piece Rabbeting Kits. Includes 1 rabbeting bit, 7 bearings (two 3/8", 1/2", 5/8", 3/4", 7/8", 1-1/8" OD) bearings and a hex key for making these depths of cuts (1/2", 7/16", 3/8", 5/16", 1/4", 1/8"). Carbide height of 1/2". |

