Cove Raised Panel Router Bits
2 flute, carbide tipped with totally enclosed ball bearing guide. Produces a graceful concave raised panel. Ideal for cabinet doors. #6387 is also used for a raised panel effect on drawer fronts. See MLCS Router Speed Control.
|Cove Raised Panel Router Bits|
all customer reviews and ratings
Average Customer Rating: (4 reviews)
Add your own review for this product
By Rodney L. June (Milwaukee WI US)
I ran the 2" #8687 on zebrawood. Even on this notorious brittle wood the cuts were clean and smooth. Overall a great bit for the price!
By Fernano jimenez (Manville Ne US)
By Douglas Huizenga (Mountain Home Ar US)
I was building a 30" vanity for my wife and the design called for 1 door and 2-9 1/2" X 11" drawer fronts. I do have a shaper but since I am only a do it yourselfer and may only use this once or twice the expense of buying the cove shaper bit was not in the budget. This bit is an excellent buy. It was shipped promptly and when used performed much better than expected from a 1/4" bit in an inexpensive 1 1/2 HP router. Bravo MLCS
By Eric Gibbs (Bridgtown Br BB)
I've been useing this bit for the pass ten years and i must say its very good