 |
||||||||||||||||
|
|
 |
||||||||||||||
|
Find the center point quickly and accurately with this handy aluminum ruler. Align ruler so that the same measurement appears on both sides of the zero mark. 
|
||||||||||||||||
|
|||
|
|||
|
|
)
|
|
|
12' LONG! Available in right to left or left to right. 1/2" wide self stick rules can be added to any fence or jig to make them easier to use. Marked in 1/16" and 1/32" increments, the tape can be cut to desired length. Reg. $ Left to Right 12' Tape Rule #9442..............................SALE $9.95  Right to Left 12' Tape Rule #9443..............................SALE $9.95 |
|||
|
||
|
||
Miter Clamps
|
|
 |
|
4 piece set for 4 corners!
3" metal wire spring clamps packed in a 4 pc kit. The sharp point holds moldings securely, while the glue dries. Perfect for compound miters, crown moldings, glue joints and picture frame glue-ups. Sharp, durable clamps maintain holding power for years. Special pliers available for easy installation. Miter Clamps #9315 FOUR CLAMPS........................SALE $13.95 Miter Pliers save time, stock, skin and enhance accuracy. They avoid scratching stock when clamps are removed, plus allow exact positioning of clamps. #9316 PLIERS...................................SALE $16.95 |
||
|
||
|
||
Complete Glue Spreader Set
|
|
 |
|
Meet all of your glue application needs with one set. Just choose the proper applicator for your job to apply glue exactly where you need it. Set includes: Two 8 oz. Bottles, 2-1/2" roller, biscuit tip & slot applicators, brush, wide nozzle, pinpoint nozzle, multiple size dowel hole applicators, and a convenient dovetail applicator tip. Also includes 2 glue tip cleaner bottles and connector sleeve. All pieces store in a sturdy molded base.
Complete Glue Spreader Set #9175..................................................ONLY $24.95 |
||
|
||
|
||
Cabinetmaker Chisel
|
|
 |
|
The cabinetmaker chisel is used on face and door frames for making deep mortises or cleaning out corners. Many carpenters, carvers, framers and furniture makers use this chisel for fine detailing work in moldings, setting depth for cabinet hardware installation, and veining. The 90°, precision machined, 9-1/2" overall length, 3/8" chisel is made of HSS and has a birch wood handle.
Cabinetmaker Chisel #9543.......................................  $20.95 |
||
|
||
|
||
Shelf Pin Drilling Jig
|
|
 |
|
Drill quick and accurate shelf pin holes in any project. Shelf pin holes are precisely spaced 1-1/4" apart at either 37mm or 64mm from the edge of your work. Any length may be drilled by indexing the jig with a shelf pin. Includes a 1/4" plus 5mm self centering bit.
Shelf Pin Drilling Jig #9322....................................................SALE $34.95 |
||
