Router Bits and Woodworking Products

Average Customer Rating: (3 reviews)
Add your own review for this product

By James Fontaine (Lander WY US)

I just assembled this stand for my Dewalt Planer.
I kept thinking at least one of the bolt holes would be in the wrong place or not straight (as is usual) but everything went together perfectly. The only thing I changed was to enlarge the holes slightly so I could bolt the base to the 1 1/2" plywood top I made. I didn't feel comfortable using just the screws that were provided.
This heavy duty should last for many years.
Jim

By Mike Harvey (Caldwell Id US)

I don’t normally do reviews but in this case I made an exception. The stand arrived when it was supposed to and when I opened the box I was really surprised with what I found. The fit & finish was much better than I expected. The hardware was better than what I have seen lately. The design of the legs and the rubber feet was really ingenious. I have never seen rubber feet like these. The angle was perfect for giving the stand a high degree of stability and it is rock solid. The only thing I could suggest as an improvement is to make the unit 3-4 inches wider.

By William T Sawyer (Land O Lakes FL US)

Another super product from MLCS. Packing was OK. All parts were there, in fact the table was partially assembled. Everything fit together nicely. The table top can be made of your choice or a router table top. Very sturdy and the adjustable roller stands are fantastic. I will be purchasing another very soon!!!

Add your own review for this product

Average Customer Rating: (2 reviews)
Add your own review for this product

By Reuben M Prichard Jr (Colts Neck NJ US)

After purchasing the standard router table stand ($70 retail) and posting a negative review of if, MLCS contacted me and offered to upgrade the stand to the the heavy duty model for the incremental difference in cost. Great customer service..thanks Chris. This model is exactly what I needed as it is rock solid and doesn't "bend in the wind" when working with long heavy stock. The "feet" mounting tabs are welded to the legs so there is no chance of bending. I transfered the wheels on the old table to this one and "what a difference"...This stand with definitly do the job and is more than worth the difference in price. PS: the old table is being used for a paint stand...much more suited to its stability.

By Mark White (Bellevue Wa US)

It's great, built one similiar years ago for on site work & the adjustable fine tune arms are most important

Add your own review for this product

Average Customer Rating: (1 reviews)
Add your own review for this product

By Reuben M Prichard Jr (Colts Neck NJ US)

I purchased this when i picked up my router table..I thought it would be fine since i was only doing some Wainscotting moulding of <5' lengths.. Since I moved table a bit, i put on heavy duty caster wheels (cost half the price of the table) but after about 10 boards the part where the wheel mounts to the leg was bent; I had to straighten it back out. Even with the normal caster in the table is way too loosy-goosey..This table is probably worth 20$ at best..and 70$ for the it's retail is nothing more than a "make up number" to make you think it is a big savings; don't forget there is no such thing as "free shipping" as you are paying for it in the actual cost (just embedded in the price).

I could be made much more study by geting angle iron from HD or Lowe's;which I probably will do eventually!

Add your own review for this product