Links to additional Router Tables:
Horizontal | Heavyweight | Precision | Table Top & Fence | Router Table Extension | Cast-Iron Table Extension

"Portable" Bench Top MLCS Router Table


The Portable Bench Top Router Table has a sturdy 1” thick table top with a durable 24” x 16” melamine surface, MDF core and banded edges, and features sturdy 11” long hinged, locking legs.

ROUTER TABLE FEATURES

  • A 12” x 9” Phenolic Router Insert Plate with removable rings that allow 3 different size openings (see #9338 All-In-One Router Plate for info)
  • Two Aluminum T-Track Slots and One Aluminum Miter Slot
  • The T-Track Slots allow attachment of featherboards or jigs to the fence
  • Split Fence has a dust port and adapter for standard Shop Vac hoses
  • Hex head adjusting screws to level magnetic insert to top
  • High Split Fence with a MDF core and melamine surface, allows edge routing for safer vertical routing
  • Router Fence features 24” long anodized aluminum angle to keep the fence at 90º (within 0.010”) for accuracy
  • Measuring tape on top of fence reads both right to left and left to right, allowing easy measurements
  • Durable plastic safety guard
  • Predrilled to accept our 11” folding legs
  • Works with our Miter Gauge (#9458)

HINGED LOCKING LEGS

  • 11” tall folding legs to support up to 150 lbs
  • Legs lock in place for maximum support
  • Bottom of steel legs are rubber coated to eliminate sliding
  • Includes mounting screws
  • Fold up for easy storage

MLCS Portable Router Table

INTRODUCTORY OFFER!
Item #9775.......................$129.95


"Cabinet Base" Bench Top Router Table


AVAILABLE IN 2 CONFIGURATIONS...
Buy Complete, or get the Cabinet Only, to use with Portable Bench Top Table (see above).

CABINET BASE FEATURES
Provides features found on many “high end” routing systems, but in a useful, compact design.

  • Constructed with an MDF core, all visible surfaces are covered by durable melamine.
  • The doors on the cabinet help to reduce router noise and eliminate sawdust & woodchips on your shop floor.
  • European style hinges allow the doors to be adjusted independently.
  • Interior space can be used to store your router accessories when not in use.
  • 21" wide x 13" deep x 15" tall interior will accommodate any router up to 15" in height. The base is 24" wide x 16" deep.
  • All parts pre-drilled for quick and easy assembly.
  • Item #9777 does not include folding legs.

ROUTER TABLE TOP FEATURES

  • A 12” x 9” Phenolic Router Insert Plate with removable rings that allow 3 different size openings (see #9338 All-In-One Router Plate for info). Hex head screws level magnetic insert to top
  • Two Aluminum T-Track Slots and One Miter Slot allow attachment of featherboards, jigs, and Miter Gauge (#9458)
  • Split Fence has a dust port and adapter for standard Shop Vac hoses
  • High Split Fence with a MDF core and melamine surface, allows edge routing for safer vertical routing
  • Router Fence features 24” long anodized aluminum angle to keep the fence at 90º (within 0.010”)
  • Measuring tape on top of fence reads both right to left and left to right, allowing easy measurements
  • Durable plastic safety guard

Mouse Over Table To See
Cabinet Without Top

Cabinet Base Bench Top Router Table
ROUTER TABLE, FENCE & CABINET BASE
Item #9777.......................$189.95

CABINET BASE ONLY
(Works with Portable Bench Top Table above)
Item #9682.......................$79.95

"Aluminum" Benchtop MLCS Router Table


Made of extruded aluminum with braces, this table is portable enough to store easily, but is "ROCK SOLID" for professional routing and shaping with top accuracy.

  • 24" wide by 16" deep by 19" high and weighs only 25 lbs.
  • Two removable rings give three bit openings (1-3/16", 2-5/8" and 3-15/16"). The 1-3/16" opening holds Porter Cable® style guide bushings.
  • The steel stand has non-slip rubber feet to ensure that the table holds firm on its own or you can use the brackets to mount to a bench or plywood base.
  • Clamping system allows mounting with any router.
  • Adjustable wood split fence (9-1/2" x 2-3/4" each) is supported by an aluminum frame with a dust hood attachment and T-Track.
  • Includes T-Track for attaching included safety chip guard or other hold down devices (stops, featherboards, etc.).
  • Built-in miter gauge and slot for fast and accurate set-up
  • Built-in power switch with a removable key for safe operation of your router.
MLCS_rock_solid_benchtop_router_table
Item #9760................................................................... $139.95

Links to additional Router Tables:
Horizontal | Heavyweight | Precision | Table Top & Fence | Router Table Extension | Cast-Iron Table Extension