Average Customer Rating: (2 reviews)
Add your own review for this product

Needs better quality control (3/5), Jul 18, 2017

By Joel Sherriff (Clover VA US)

This design was perfect for my application. Face down routing means forgiveness where wood thickness is not absolutely identical in all parts...however, I could not get a proper fit between the rail and stile joints until I filed down the base of the dado bit where it sits on the ogee bit. It was as if it came with shims installed, but there were none and I had to remove approx 0.03" from the mating surface from the bit before I could get my test pieces to fit w/o extreme clamping pressure. Perfectly acceptable fit afterwards, just be prepared you may have to do a lot of trial, error, and tweaking.


Bryant (5/5), Feb 6, 2011

By Bryant Horton (Charlotte No US)

Used these bits to make divided light cabinet doors. Quick, easy,nice smooth finish cut. The cut depth is 3/16,so remember this if you read any of the instructions on this site. Be sure to make set up blocks the same thickness as your work piece, and make sure they fit together properly with all flush surfaces before you begin, it will save a lot of frustration when the piece is glued and screwed. Great set.


Add your own review for this product