Router Bits & Woodworking Products

2 flute, carbide tipped with totally enclosed ball bearing guide. For use in cutting slots (kerfs). Bits #5364/#7664, and #5361/#7661 are designed for precision biscuit joinery (See biscuits). Also use for shiplap joints, tongue and groove joints, T‑moldings, rabbeting, etc.

Three wing carbide tipped with 8mm (approximately 5/16") bore, and 1‑7/8" large diameter. Cuts 1/2" deep when used with our arbor and bearing. To reduce depth of cut use larger bearings (see the chart below). See the biscuit slot cutting chart.

2 flute, carbide tipped with totally enclosed ball bearing guide. The top mounted bearing is ideal for cleaning out old tongue and groove flooring and for applications where a standard bottom bearing on a slot cutter is in the way. Also great for cutting T‑slots, or small, slat wall type grooves.

2 wing carbide tipped with 5/16" bore. Buy as individual cutters or as complete assembly with arbor and bearing. Cut flutes on the edges of curved pieces. Stack different cutters to create a stepped flute for a decorative edge or molding, or stack multiple cutters to create miniature fluted moldings for clock cases, small bookcases or cabinets. The 1/2" arbor has 1‑7/16" length for cutters, spacers and bearings.

SAVE $6! Simply adjust the arrangement of the cutters and shims on the 1/2" arbor to create a wide variety of groove sizes for dadoes, tongue and groove joints, rabbets, or biscuit joints. With the included 6 carbide-tipped slot cutters (1/16", 3/32", 1/8", 5/32", 3/16", and 1/4"), shims, and bearing (7/8" OD x 5/16" ID) for 1/2" cut depth, almost any groove from 1/16" to 11/16" can be created. Individual cutters can also create precisely-sized grooves. Click here to view or purchase additional bearings to adjust the depth of cut. Storage box included.