-
Universal Router Plate
- Reviews
The Universal baseplate includes a centering pin to perfectly align the baseplate and 1-3/16" Porter Cable® style guide templates to your router collet. The 6" clear acrylic baseplate is predrilled for most common routers.
Compatibility and Mounting Hole Diagram (PUP)
Universal Router Plate
#9099.....................$27.95 
Centering Pin
#9055....................$9.95
all customer reviews and ratings
-
Universal Template Guide Plates
- Reviews
Sub bases can be easily mounted to any brand router. Those with a 1-3/16" center hole will accommodate standard guide bushings.
Universal Template 6" Guide Plate
1/4" Acrylic Round Plate w/ 1-3/16" Hole
#9091.....................$14.95
Universal Template 7" Guide Plate
1/4" Acrylic Round Plate w/ 1-3/16" Hole
#9092......................$17.95
all customer reviews and ratings
-
Brass Template Guide Kit
- Reviews
The 9 piece kit will significantly expand the use of your router. For template controlled operations such as dovetailing, stair routing, hinge butt routing, omni jig template, lock face routing and other general template operations. Template guides can be used directly with any router having a baseplate with a 1-3/16"* diameter center hole. The kit contains two lock nuts and seven different template guidess (5/16", 3/8", 7/16", 1/2", 5/8", 3/4", and 51/64" OD). Universal Router Plate #9099, makes kit universal.
**Works with most DeWalt, Porter Cable®, and Skil routers. Works with some Black and Decker, Elu, & Hitachi routers.#9674....................$24.95
all customer reviews and ratings
Average Customer Rating: 
(1 reviews)
Add your own review for this product
By John Wolbach (Lansdale PA US)
These template guide bushings are nicely machined with good surface finish and no burrs. The collar diameters are accurate fractional sizes within +/-0.003 inch. Threads are cleanly cut, and the nuts fit well. The collars seem concentric with the outside diameter.
For some unknown reason, each bushing has a different height collar, ranging from 0.160 to 0.565. I sawed off the excess and faced them off in the lathe for compatibility with 1/4 thick templates.
The flange (outside diameter that fits into the recess in the router base) ranged from 0.093 to 0.122 thick. My router base recess is 0.110 deep, and my router table plate insert is 0.102 deep. So a little more lathe work was needed to turn the overly-thick flanges to 0.100.
Overall, I found these template guide bushings to be functional and worth the asking price.