3 flute, carbide tipped with a 3/4" bore.
Supplied with a 1/2" bushing and rub collar. To produce both the cope and stick cuts, simply re-arrange the cutters of the Reversible Combination Rail and Stile Cutter #1000 on the spindle or raise and lower the Stacked Rail and Stile Cutter #1007 and #1010. Both versions make an equally good cut with the ogee profile. Cut a 1/4" thick x 3/8" deep tongue. For wood thicker than 7/8" use the reversible type (#1000) and rabbet out the bottom of the rail end. For rub collars, spacers, and bushings, click here.
Rail & Stile Shaper Cutter Instructions(PDF)| Rail and Stile Shaper Cutter | ||||||
|---|---|---|---|---|---|---|
| Item # | Wood Thickness |
Large Diam. |
Carbide Height |
Price | ||
| #1000 | 11/16"-7/8" | 2-3/8" | 15/16" | $79.00 |  |
|
| #1007 | 11/16"-3/4" | 2-3/8" | 1-3/8" | $99.00 | |
|
| #1010 | 11/16"-3/4" | 2-3/8" | 1-3/8" | $99.00 | |
|
| #286 Replacement 4 Pc. Copper Spacer Set | $4.00 | |
||||
| Set-Up Blocks For Rail & Stile Shaper Cutters | |||
|---|---|---|---|
| Item # | Profile | Price | |
| #9791 | Use for #1000 and #1007 |
$10.95 | |
| #9748 | Use for #1010 | $10.95 | |
Plywood Panel Conversion Kit
5.2 mm slot cutter creates a groove for European Plywood. Replaces the existing slot cutter for #1007 and #1010 Rail & Stile Cutters.
#283.................................$34.95
5.2 mm slot cutter creates a groove for European Plywood. Replaces the existing slot cutter for #1007 and #1010 Rail & Stile Cutters.
#283.................................$34.95
